|
|
|
Product > Mold Release > Silicone Mold Release Formula 600
|
|
| |
| Paintable Silicone Mould Release Formula 600 |
PRODUCT CODE : H-46
BRAND NAME : Paintable Silicone Mould Release Formula 600
| DESCRIPTION
Formula 600 uses a paintable silicone as the release agent. It contained a modified polysiloxane compound which is suitable for use in precision injection and compression molding of thermoset and thermoplastic materials. It was developed to meet the requirement for a thin film non-oil paintable release agent for the moulding industries. This formulation is CFC free and does not have any CFC related materials. It can bed used where subsequent processing such as spray lacquering, metal foil stamping or printing that follows.
|  | | PRODUCT PROPERTIES
Faster moulding, heat stable, non-toxic, non-staining, transparent, odourless and colourless.
| | Typical Physical & Chemical Properties | | Specific Gravity (250°C) | : 0.67 | | Flash Point (solvent) | :> O°C | | Appearance | : colourless transparent liquid | | Flammability (solvent) | : Flammable | | Operating Temperature | : up to 240°C | | Evaporation Rate | : Fast |
| Direction of Use - Make sure the mold surface is clean and dry.
- Spray evenly from a distance of 15 to 20 cm to obtain good coverage.
- Do not overspray.
| Caution
Contents under pressure. Do not spray near any fire or sparkling point. Do not store or expose the container for a long duration in places with temperature above 40°C. Do not pierce or burn the container. Use in good ventilation areas. Avoid breathing the vapor and keep out of reach of children.
|
28 February 2005.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
