|
|
|
Product > Contact Cleaners > Spot Remover SP-3
|
|
| |
| Spot Remover (Non-Chlorinated) |
PRODUCT CODE : SP-3
BRAND NAME : Spot Remover (Non-Chlorinated)
| DESCRIPTION
SP-3 is developed to be used as a spray on brush off formulation. It contains no chlorinated solvents suitable for factories which adopt new production standards and fabrics requirements. It is suitable for removing stains, oil, grease without leaving any ring on the substrate. Can be used on wool, cotton, silk, dacron, nylon and synthetic materials. Safe on plastic, rubberized fabric or leather. Good to be used on upholstery, slip covers, carpets, wallpaper and clothes.
| | Typical Physical & Chemical Properties | | Specific Gravity (25°C) | : 0.86 | | Flash Point | : < 0ºC | | Appearance | : Translucent liquid | | Flammability | : flammable (liquid) | | Operating Temperature | : use it in normal temperature | | Evaporation Rate | : > 5 minute |
| Direction of Use - Shake well before using.
- Hold can and spray from 10 cm to 20 cm from stain spot.
- Let dry completely to a white powder, then brush or vacuum off the powder.
- Repeat cleaning if required.
| Caution
Contents under pressure. Do not spray near any fire or sparks. Do not store or expose the container in places with temperature above 48°C. Do not pierce or burn the container. Use in well ventilated areas. Avoid prolonged breathing of vapor or contact with eyes and skin. In case of eye contact, flush immediately with water for at least 15 minutes. If discomfort persists, see a doctor.
| | Contains: | Aliphatic Hydrocarbon
Hexane Isomers
Silica
Liquefied Petroleum Gas | CAS No. Not Available
CAS No. 110-54-3
CAS No. 7631-86-9
CAS No. 68476-85-7 | |
4 June 2005.
| |
|
|
|
Email
to friend 
|
|
| |
|
|
